Joined in 2023 
82 
63 About this deal
If draining your tank or water butt is not easy, you could add a sponge or rubber ball to keep water moving and cause the water to push against the ball, not the tank wall. If you would prefer to avoid draining your water butt, you can insulate it to stop ice forming. Anything from bubble wrap (reuse any wrap you have collected from deliveries or house moves) can insulate a water butt and guard it from harsh weather. However, the best option is to invest in a water butt made from UV- resistant materials. Water butts such as the 380L Garden Planter Water Butt Blue with Tap Kit & Diverter can be used throughout the year without the need for careful maintenance. It's likely to require a period of several days at sub-zero temperatures for a water butt to completely freeze up and potentially split - but it's better to be safe than sorry when the big winter chill arrives.
Once that is in place, you can then attach the diverter to the water butt. Always start with the downspout. You can always move the water butt to the appropriate place, however, you will find it rather difficult to move the house. This cookie, set by YouTube, registers a unique ID to store data on what videos from YouTube the user has seen. To install your water butt, simply measure the height of your water butt, ensuring you mark the height on the downspout. So, before you fit the rainwater diverter, you will need to make two different cuts. The first cut is made to the downspout.A downspout replacement is where you cut off part of the downpipe and place the water butt directly below it. This will require the installation of an overflow pipe. Slimline water butts are designed for installation in gardens with a small footprint. They generally have a capacity under 100 litres, so will need to collect water via a rainwater diverter. A great option if you’re looking to save on space. The first thing you need to do is decide between fitting your water butt as a downspout replacement or using a rainwater diverter.
Before you read about how to install a water butt, it’s important to have an idea of what water butt you intend to install. Different water butts will require a different installation technique depending on their design. So, if you’re tired of watching the April showers drain away before being hit with hosepipe bans in May and June, then this guide will help you save money and harness the water that falls on your land. If you’re installing a downspout, simply slide the downspout through the specially designed water butt hole. You can then move onto the final step below.
Free Advice
A standard water butt is about 1 metre tall and half a metre wide with a tank capacity of 210 litres. You can choose between downspout replacement installation, which means your water butt would sit under a garden shed, garage or house with the downspout flowing directly into the water butt. In this case, you would need to install an overflow pipe to prevent water flooding in the event of heavy rain. Alternatively, you can also choose to install a rainwater diverter. This will divert a portion of the water from the downspout while also preventing the risk of flooding. Here we list the main types of water butts available and the variety of challenges each style may pose. A rainwater diverter is a pipe connected to both the downspout and the water butt, allowing you to syphon off water without overflowing the butt. This is the more popular option, although it will require more effort and tools to install. Step 2: Measure the Cut (Downspout Replacement) Looking after water butts in the winter can be a simple task and when you’re into the swing of this routine every year, it gets easier. Installing filtration systems for use all year round will make cleaning and care much easier come winter as debris has been prevented from entering your tank in the first instance. Insulating your water butt can stop water from freezing and getting frost on it, which can prevent your tank from expanding and splitting. Winter can be a harsh season for some areas of the UK but your rainwater harvesting system needn’t suffer!
To keep your barrel safe during the cold winter months you should leave the tap or spigot open. This will allow the water can drain out so it won’t freeze and potentially damage your butt. If the tap is open and the barrel is empty, you can safely leave it outside all through the winter. Rainwater butts are simple devices which don't really need too much care - but the risk of splitting from expanding ice is real enough to consider taking precautions. Some owners of water butts even recommend removing the downpipe, diverter, and connector but most people believe this is being over-cautious and not worth the effort involved when weighed up against the risks of significant freezing. If you have a plastic barrel which doesn't have a proper tap attached - maybe one you've made yourself from a plastic dustbin, wheelie bin or other plastic tank - you should consider emptying it and leaving it on its side for the winter. Whether you go for a slimline or designer butt, all water butts should be sold with a lid. Water butts without lids can pose a drowning hazard to children, pets and wildlife, while open butts can breed bacteria due to debris entering the butt. If you have children, you should also invest in a water butt with a child-safe lid. How to Install a Water Butt Pump Step 1: Downspout Replacement or Rainwater Diverter
If you’re using a downspout installation, you will need to install an overflow pipe. This is a pipe that will allow water to overflow into the drain. You should have an overflow pipe supplied with your water butt. Follow the instructions supplied with your water butt for this installation. In most cases, this will be a simple case of attaching the pipe to the corresponding overflow hole.
Great Deal 
New Comment